Put the heat transfer film/vinyl on carving machine, and adjust the pressure and ; Select the image that you to print in computer, and select ,then click on button of engraving; Cut the carved patterns from the film, and tear off the parts that you 't need, a picture is for using; Put the carved patterns on the clothes. Print the image by a heat transfer machine with temperature of 150~190 degree for 8-15 seconds, and off the transparent protective film at , then the image has been transferred to the garment. These instructions might vary depending on the transfer machine being used for the application. Variances in time, pressure, and/or temperature might be necessary. Proper testing is strongly recommended. color, Have stereo after finished, Good Adhesive properties, No cracking with washing many . Without peculiar smell, fashion and environmental. 't need to Customize, one piece clothing can be , It's opaque printd on the dark color garment. Use your Cameo, for Circuit, or any of electronic cutter capable of cutting in reverse or . You can also use a heavy duty paper punch for cutting out images. Works well with Felt, polyester, cotton, -cotton, acrylic, Leather, and Paper materials. Decorations for T-Shirts, Jeans, Ribbons, Shoes, Bags. Can to: clothes with waterproof coating Nylon, metal surface, Porcelain Plastic and Woodward. colour: as shown Material: PU Size: 25x30.5cm Package Contents: 1 set x Thermal transfer sticker(6 roll) Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.