Features: 1It is made of high?quality brass + stainless steel, which is durable and corrosion resistant. 2The 8?inch pump injects more air with each pump to pressurize the barrel faster. 3Easy to disassemble and clean, widely used in bars, pubs, restaurants, hotels or homes. 4Suitable for G5/8 keg coupler (with S?type coupler), which is convenient for beer distribution. 5Easy installation, will not affect or reduce the taste of beer, is a practical draft beer accessory. Item Type: Beer Keg Pump Kit Material: Brass+Stainless Steel Thread: G5/8 Weight: Approx. 2601g / 91.7oz Product Description: This product is a combination of an inflator and a tap, a wine tube, and a dispenser. It can be directly installed on the stainless steel draft beer barrel, and then it can be pressurized and pumped. The gas will pressurize the wine and open it. You can drink delicious drinks with the tap. You can also use this product to directly connect with carbon dioxide to pressurize the wine, and combine it at will, which is convenient and practical. Convenient to carry, it is a very good tool for outings to replenish beer barrels, and it can temporarily increase the pressure of beer to make beer. How to Use: 1. Use a small bucket (not included). 2. Turn on the faucet until all pressure is released. 3. Turn on the faucet and start pumping until the required flow rate is reached. 4. Stop pumping, turn on the pump only by pumping the faucet, and pump only to maintain a good beer flow. 5. Repeat step 3 until the keg is empty. 1 x Beer Keg Pump 1 x Beer Dispenser 1 x Beer Tap 1 x Tap Handle 6 x Accessory