Car Rear View Camera For Peugeot 206 207 307 306 308 406 407 5008 Partner Tepee _x000D_ For (For reference) 2001-2008 For Peugeot 206 2D CC For Peugeot 206 4D SEDAN For Peugeot 206 3D/5D HATCHBACK For Peugeot 206 5D SW (STATION WAGON) 2008-2014 For Peugeot 207 2D CC For Peugeot 207 3D/5D HATCHBACK For Peugeot 207 5D SW (STATION WAGON) 2003-2010 For Peugeot 306 5D SW (STATION WAGON) For Peugeot 307 4D SEDAN For Peugeot 307 5D SW (STATION WAGON) For Peugeot 308 2D CC For Peugeot 308 5D SW (STATION WAGON) 2006-2008 For Peugeot 406 5D SW (STATION WAGON) For Peugeot 407 5D SW (STATION WAGON) For Peugeot 5008 5D MPV For Peugeot Partner (M59) (B9) (M49) For Peugeot Partner Tepee (B9) Specification: Image Sensor: CCD Effective Pixels: NTSC 512 (H)x492 (V) Horizontal Resolution: 420 TVL Minimum Illumination: 1.0Lux F=1.2 (0Lux with IR on) Night Vision: 5-10meters Lens: 2.8mm Diagonal Viewing Angle: 120 degree optional Synchronization: Internal synchronization Signal to noise ratio: >48db Signal System: NTSC Electronic Shutter: Auto Video Output: RCA interface, 1.0Vp-p, 75Ohm White Balance: Auto Backlight Compensation: Auto Power: DC 12V Current Consumption: 50-60mA, Max 130mA with IR on Operating Temperature: -20C~ +60C, RH95% Max Storage Temperature: -30C ~ +80C, RH95% Max Video cable length: 6m Power supply cable length: 1m Features: support night vision. CCD imaging sensor. Support NTSC Video system. High-definition and wide viewing angle. Applicable to variety of Vehicles: car, truck, RV, mini-van etc. Easy to install, you can install the monitor via mount holder or universal bracket. Package Content: 1x Car Rear View Camera 1x6m Video Cable 1x1m Power Cable Install tips Take out your license plate light at the back of your car. Fix the camera to where the stock license plate light was. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative. Connect the video cable of the camera to the extension cord. Connect the extension cord to your car monitor. You will see the images when your car is in reverse shift. _x000D_ _x000D_