Gramophone Phonograph Motor Record Players Engine for Player EG530SD-3F DC5-12V

¥1,799
+ 配送料¥749

Gramophone Phonograph Motor Record Players Engine for Player EG530SD-3F DC5-12V

  • ブランド: Unbranded

Gramophone Phonograph Motor Record Players Engine for Player EG530SD-3F DC5-12V

  • ブランド: Unbranded
価格: ¥1,799
販売元:
¥1,799
+ 配送料¥749

在庫あり

以下の支払い方法を利用することができます

説明

Description: brand new and high quality Feature: Motor for record player, vinyl record player, antique record player and so on. CW means clockwise and CCW means counterclockwise. You can only tune 33, then 45, and 78 at the end. At 33 speeds, the motor speed is: 1130 2%. At 45 speeds, the motor speed is: 1520 2%. At 78 speed, the motor speed is: 2600 2%. The diameters of the copper sleeves are different. When the speed of the motor is the same, the turntable speed of the record player is different. The width of the copper sleeve is 7 mm, which can adapt to various width belts on the market. The distance between the top of the copper sleeve and the surface of the motor determines whether the belt and the turntable are on the same plane. If the difference is relatively large, the belt will easily fall out and the motor will not work properly. Specifications: Item Type: Turntables Motor Model Number: EG530SD-3F Rated Voltage: DC5-12V Direction of rotation: CW Material: Copper Size: Motor diameter: 33mm/1.2in; Top distance: A/C: 22.5mm/0.8in, B: 18.5mm/0.72in, D: 20mm/0.78in; Height: 25mm/0.9in; Installation screw hole distance: 22.5mm/0.8in Color: Silver+Gold Optional Type: A: 14+7mm/0.5+0.2in, 5.5+7.5mm/0.21+0.29in; B: 11.5+7mm/0.4+0.2in, 5.5+7.5mm/0.21+0.29in; C: 14+7mm/0.5+0.2in, 4+7mm/0.1+0.2in; D: 10+7mm/0.3+0.2in, 4+7mm/0.1+0.2in Quantity: 1 Pc Adjusting Method: When the changeover switch reaches 33, use a small flat-blade screwdriver to adjust the resistance of the L hole of the motor, and the normal disc is 33 revolutions per minute. When the changeover switch reaches 45, use a small flat-blade screwdriver to adjust the resistance of the H hole of the motor, and the normal disc is 45 revolutions per minute. When the transfer switch reaches 78, use a small flat-blade screwdriver to adjust the resistance on the PCBS board. The normal disc is 78 revolutions per minute. Note: No retail package. Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x Turntables Motor
  • Fruugo ID: 359740161-782423902
  • EAN: 6918524036051

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Not suitable for children under 3 years. Adult supervision required

配送と返品

3日間以内に発送

  • STANDARD: ¥749 - 間の配達 月 17 11月 2025–水 26 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る