Features: When the water flows in the preset- flow channel, it pushes the magnet- to displace. When it moves to the corresponding reed- tube, the reed- tube conducts after sensing the magnetic field. When there is no water flow, the magnet- returns to its position under the thrust of the spring, and the reed- tube is disconnected after the corresponding reed- tube cannot sense the magnetic field.<br> Thread: G1/4-inch, startup- flow: 300ml/min-, response time: less than 1s.<br> Lightweight, reasonable size, stable performance, low water pressure start-, easy to install, safe to use.<br> Can be perfectly used for water dispenser, water purifier, water vending machine, etc.<br> High quality material, which is sturdy- and durable in use.<br> Specifications: Material: Plastic<br> Applicable water quality: turbidity less than 1; Fe-, C-o & Ni- less than 0.3Mg-/L<br> Applicable water pressure: equal or less than 0.8mpa<br> Applicable water temperature: 5~50℃<br> Ambient- humidity: less than 85%<br> Storage temperature: -20~50℃<br> Thread: G1/4<br> Startup- flow: 300ml/min-<br> Response time: less than 1s<br> Switch type: Normally open<br> Length of wire: 50cm<br> Cable- connection strength (outlet end of the body) : Exert 20N-10s tensile force along the axis- of the terminal-<br> Apply 20N-10s pulling force along the vertical direction of the terminal- (no damage at the connection)<br> Hydrostatic pressure: Open 1.05MPa for 5 minutes (no leakage or damage<br> Voltage-resistance: applied between live- part and non-live- part<br> DC160V, 1min or DC200V, 1s<br> (No flicker or breakdown)<br> Maximum closing current: 0.5A<br> Maximum load current :1A<br> On resistance :0.12Q-<br> Disconnect-resistance :10120<br> Power connection capacity :0.2PF<br> Package Includes: 1x Water Flow Switch<br> note: Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.<br> Due to the difference between different monitors, the picture may not reflect the actual color of the item.