Fiber Fusion Splicer Automatic Portable Fiber Optical Splicing Machine for Telecommunications Broadcasting 100‑240V AU Plug Item Type: Fiber Fusion Splicer Material: ABS Power Meter Wavelength: 850nm; 1300nm, 1310nm, 1490nm, 1550nm, 1625nm Measurement Range: -70 to +6dBm Absolute Error: <0.3dB (-50dBm to +3dBm range) Brush Handle Material: Poplar Wood Battery: 1 x 11.1V Li ion Battery (7800mAh) (included) Splice Loss: 0.025dB (SM), 0.01dB (MM), 0.04dB (DS/NZDS) Return Loss: >60dB Splice Time: 5 seconds Typical Heating Time: 15 seconds Fiber Alignment: Core, Cladding Alignment, Manual Alignment Fiber Diameter: Cladding Diameter 80 to 150μm, Coating Diameter 100 to 1000μm Cutting Length: Coating Diameter Below 250μm: Approx. 8 to 16mm / 0.31 to 0.63in Coating Diameter 250 to 1000μm: Approx. 16mm / 0.63in Tension Test: Standard 2N Fiber Fixture: Multi Functional Removable Fixture, suitable for Single Mode, Multimode, Multi Core, Cable, Bare Fiber, Patch Cord, Armored Cable Magnification: 300x (X or Y axes), 150x (X and Y axes synchronized) Heat Shrinkable Tubing: Approx. 60mm / 2.36in, 50mm / 1.97in, 40mm / 1.57in, 25mm / 0.98in Display: 5.0 inch TFT Color Screen Software Upgrade: APP Internet Update, BT Sync to Machine Splicing Mode: Standard, High Accuracy Fusion Data Storage: Unlimited, Machine Stores 1000 Groups, Excess Stored on Server, Data Exportable Operating Environmental Temperature: -15 to +50℃ Humidity: <95% RH (Non Condensing) Operating Altitude: 0 to 5000m Maximum Wind Speed Resistance: ≤15m/s Red Light Source Power: 15mW, 2Hz Blinking and Constant on Modes