2 Channel Relay Module with Optocoupler Isolation High&Low Level Trigger Module(12V)

¥1,549
配送料無料

2 Channel Relay Module with Optocoupler Isolation High&Low Level Trigger Module(12V)

  • ブランド: Unbranded

2 Channel Relay Module with Optocoupler Isolation High&Low Level Trigger Module(12V)

  • ブランド: Unbranded
希望小売価格: ¥1,999
価格: ¥1,549
得する金額: ¥450 (22%)
販売元:
¥1,549
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Features:The module uses high-quality relay, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A.Using patch optocoupler isolation, strong driving ability, stable performance; trigger current 5mA.The module working voltage is available in 5V, 9, 12V, 24V.The module can be triggered by a jumper to set a high level or a low level.Fault-tolerant design, even if the control line is broken, the relay will not move.Power indicator (green), relay status indicator (red).The interface design is user-friendly, all interfaces can be directly connected through the terminal block, very convenient.Specification:Module Size:50 x 41 x 18.5mm / 1.97 x 1.61 x 0.73inHole Diameter: 3.1mm/0.12inHole Interval Distance:44.5 x 35.5mm / 1.75 x 1.4inWiring Diagram:DC+: Connect the positive pole of the power supply (the voltage is required by the relay, there are 5V.9V.12V and 24V selection).DC-: connected to the negative pole of the power supply.IN1:1 signal signal trigger terminal, you can set the high or low level control relay to pull in.IN2: 2 channel signal trigger terminal, you can set the high or low level control relay to pull in.Relay output:NO1: 1 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM1.COM1:1 channel relay common interface. NC1: 1 channel relay normally closed interface, short circuit connection with COM1 before the relay is closed, suspended after suction.NO2: 2 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM2.COM2: 2 channel relay common interface.NC2: 2-channel relay normally closed interface, short-circuit with COM2 before the relay is closed, and float after the suction.High and low trigger selection: 1. S1 is a high-low trigger selection for 1 relay;2. S2 is the high and low level trigger selection of 2 relays.3 com is shorted with low, the corresponding relay is triggered by low level, and when com is shorted with high terminal, it is triggered by high level.Package List:1 x Module
  • Fruugo ID: 417914838-881261943
  • EAN: 7792047615042

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 月 01 12月 2025–月 08 12月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795