Color: Silver Material: metal and plastic Length: approx. 30 cm (11,8 inches) Mounting Methods: Standard SAE pattern with 5 holes Wood protection: IP67 Output signal: Standard American 0-190 description Range Resolution: 10-40 mm Operating temperature: -40C 85C Item Included: 1 x Water Level Sensor Sender 1 x Gasket 5xM5x16 Suitable for: trucks, buses, power generators, boats and boats This is a aftermarket replacement item but is not original note: 1) All dimensions are measured auxiliaryly, small deviations can help. 2) The color stands out due to the color settings of each monitor. 3) Use only for fuel gauge 0-190 discussed. 1) Connect the black cable to the external light source. 1) According to the fabric specification. 2) Perfect parallel to the original. 3) When the oil or water level is empty, between the float the sensor and the bottom of the sensor will be 3-21mm wide. If it is a safe distance, the sensor can work normally. When the oil or water level is full, between the sensor float and the upper element will be 3-15mm wide. If it is a safe distance, the sensor can work normally. 4) Contactor, fixed output signal. 5) Wide waste in fuel, water, kerosene and chemical tanks. 6) Simple and strong design, advanced at advanced level. 7) Long, anti-vibration, explosion-proof. Wireless connection: 1) Brown-Signal output 2) Blue-Negative (-) 3) Empty oil level-0 ohm 4) Full oil level-190 discussed