Feature: 1. The required temperature can be arbitrarily adjusted without causing damage to the cutting material. 2. The heating is fast, and the blade can be used after being turned on. 3. The cutting speed is fast, the cutting surface is clean, the power is low, and the isolation transformer is used, which is very safe. 4. Mainly used for cutting cloth trademarks, lace, nylon rope, buckles, lace, webbing, cutting and bonding trademarks, tapes, zippers, etc. 5. Blades made of high quality materials have a long service life. Specification: Item Type:Hot Cutting Machine Material:Plastic+Aluminum Plug:CN Plug 170~220V Power:180W Package List: 1 x Hot Cutter Note: 1, If the blade is not hot enough, please tighten the nut of the blade.2. After a period of time, the heat of the blade is lowered, remove the blade, and clean the two ends of the blade with gauze (contact the screw), and then tighten the nut with a small wrench.3. After use, the next time you use it, the blade is not red enough, or does not heat at all, remove the blade, use gauze to clean the two ends of the blade, and then tighten the nut with a small wrench.4. The indicator light is not bright, and burn the fuse, please use 2A fuse, if you continue to burn, you need to repair.