Item Type: Hot Knife Foam Cutter <br>Material: Glue Shank Soldering Iron <br>Input Voltage: AC 100-240V <br>Output Voltage and Current: DC12V 3A <br>Operation: Thermostat Power and Thermostat and Switch, Thermostat Counterclockwise Screwed to the End Is Off <br>Power: 36W <br>Frequency: 50Hz <br>Function: Engraving Pearl Cotton, Bubble Board, Etc. <br>Socket: Approx. 5.5 x 2.1mm / 0.22 x 0.08in (Compatible with 5.5 x 2.5mm / 0.22 x 0.1in) (Manual Measurement, There Is a Small Distance Difference) <br>Size: Approx. 20 x 13 x 41cm / 7.9 x 5.1 x 16.1in<br>1、SMOOTHLY CUT: Cutter heats up quickly and is easy to use, cuts foam quickly and smoothly, and sealing edges clean and free of debris. <br>2、ERGONOMIC HANDLE: The Foam cutting tool features an ergonomically designed handle that makes operation easier and comfortable to hold. <br>3、DIY CUTTING: You can cut the stencil or foam block from any angle and then process it into the desired shape, easy to use. <br>4、APPLICATION: Electric styrofoam cutting tool can carve pearl cotton, polystyrene board, foam board, etc. It is perfect for cutting, carving and writing on polystyrene foam. <br>5、BENDABLE: The heating tube of Foam board cutter can only be bent once, repeated bending at a certain point may cause breakage.1 x Hot&nbsp;Knife&nbsp;Foam&nbsp;Cutter<p>1 x&nbsp;Adapter&nbsp;</p>Manual Measurement, There Is a Small Distance Difference Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.