Carbon fiber tank protectors are designed to enhance the motorcycle's appearance while providing additional protection to the tank from scratches and shocks. Made of high-quality carbon fiber, this protector is lightweight and durable. 100% carbon fiber. Before installation:Make sure the surface of the tank is clean and free of dirt, dust and oil stains. Use the cleaning cloth and a mild cleaner or isopropyl alcohol to wipe the area where the protector will be attached. Wait until the surface is completely dry before installing. Installation steps:Place the carbon fiber tank protector on the tank to determine the correct location. Make sure it aligns correctly with the edges of the tank.Use tape, Press down firmly on the tape. Carefully remove the backing paper from the tape. Align the protector with the edge of the tank and press firmly into place to ensure there are no bubbles under the protector. Hold the protector for about 30 seconds to ensure a firm bond. Check installation to make sure protectors are securely connected and in the right position.(No tape included) After installation care:Avoid cleaning the area around the tank protector for at least 24 hours after installation to allow the adhesive to fully set. - Regularly check the adhesion of the protector, clean with a soft cloth, and maintain the appearance. For Honda CBR650R CB650R 2019 2020 2021 2022 2023 Colour:Carbon Fiber Material:Carbon Fiber Package Contents: 1 pair x Motorcycle Fuel Tank Protective Cover Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.