Motorcycle Gear Display Display Gauge Meter For HONDA GL1800 GL 1800 Gold Wing 1800 ST1300 XL125V VTR1000F RVT1000RR RC51 CbR150 -- WITH HONDA LOGO Description: Product Condition: 100% Brand New Product Material: LED and ABS Plastic Color: Blue, Green, Orange, Red and White Quantity: One Piece Easy to install, no installation instruction required. Fitment: For HONDA CB400 (2001-2005) For HONDA CB400SF (1999-2005) For HONDA CB600F (2003-2006) For HONDA CB600S (2000-2002) For HONDA CB900F Hornet (2002-2008) For HONDA CB1100SF (1999-2004) For HONDA CB1300SF (1998-2004) 002)For HONDA CBF500 (2004-2006) For HONDA CBF600 (2004-2007) For HONDA CbR150 (2015 Modify Plug) For HONDA CBR600F Hornet (1995-2010) For HONDA CBR600F3 (1995-1998) For HONDA CBR600F4 (19th 99-2000)For HONDA CBR600F4i (2001-2006) For HONDA CBR600FS (2001-2003) For HONDA CBR900RR (1994-2003) For HONDA CBR919RR (1996-1999) For HONDA CBR929RR (2000-2001) For HONDA CBR954RR (2002-2003) For H ONDA CBR1100XX (1996 -2008) For HONDA 599 Hornet (2003-2006) For HONDA 919 Hornet (2002-2008) For HONDA X 4 (1997-2003) For HONDA XL125V Varadero (2001-2006) For HONDA VRX 1800 (2002-2004) For HONDA VFR 750 (1994-1997) For HONDA VFR 800 (1998-2005) For HONDA VTX 1300 (2003-2011) For HONDA VT125C Shadow (1st 999- 2009) For HONDA VT 750S (2010-2014) For HONDA VTR1000 SP1/SP2 (2000-2006) For HONDA VTR1000F FireStorm/SuperHawk (1997-2005) For HONDA Valkyrie Rune (2004-2006) For HONDA RVT1000RR RC5 1 (2000-2006 )For HONDA ST 1300 Pan European (2002-2007) For HONDA GL 1800 Gold Wing (2001-2004) For HONDA NRX 1800 (2004-2006) - Product installation and setting methods. You need to configure this module after installation. Only do the setup when the engine is warm so the idle speed is normal, find a long straight road with light traffic. The device does not learn the same hardware. It makes it twice as easy to set up on the road. You can even swipe down and stop during setup if needed. Don't stare at the display, watch the road and drive with the utmost care as always! - Turn on the ignition. It will display backwards (6 to 1), indicating that the memory is clear. - When "L" flashes, observe the engine in neutral and allow the engine to idle. - It will display "1" flashing. Select first gear, release the clutch and keep the engine speed above idle. Display flashes faster as the device learns the gear. - When the display shows "2", select two-position. - Repeat this process until all gears have been thought through (5 or 6). - The device is programmed and should indicate the gears correctly. - Now that ignition is turned on, it will display forward (1 to 6), indicating that it is fully functional. Product installation instructions and photos: Find the connector under the fuel tank or under the seat The green cable connects to the motorcycle crankshaft sensor cable If you have any questions, you can talk to me. Thank you