説明
Description:
Condition:100% New
Quantity:1/2/5 SETSInOne Package
Colour: Clear
Material: Crystal Clear premium TPU film
Features:
1.Protects cluster screen from scratches, dust, debris, heat and UV
2.Seals existing scratches underneath and makes the cluster screen like new again
3.Easy to clean and wipe the dirt off without the fear to scratch the cluster screen
4.Leave no residue when removed
5.Comes with Cleaning kit and Squeegee
FITMENT:
Description:
Condition:100% New
Quantity:1/2/5 SETSInOne Package
Colour: Clear
Material: Crystal Clear premium TPU film
Features:
1.Protects cluster screen from scratches, dust, debris, heat and UV
2.Seals existing scratches underneath and makes the cluster screen like new again
3.Easy to clean and wipe the dirt off without the fear to scratch the cluster screen
4.Leave no residue when removed
5.Comes with Cleaning kit and Squeegee
FITMENT:
ForHondaPCX1602021+
ForHondaPCX1252021+
Installation:
1. Clean the cluster screen with microfiber cloth to remove dirt and dus;
2.Remove the liner with label Step1.(Make sure that the film doesnt come up with the clear liner)
3.With the liner removed completely, spray liberal amount of water on the adhesive side.
4. Alight the screen protector with button or edge then gently place it on the cluster.
5.Gently squeeze water and air pockets out with squeeze. Try to remove as much water and air pockets as you can.
6.Remove the liner with label Step2.(Make sure that the film remains perfectly aliged and doesnt come up with the top liner.
7.Use squeeze to remove remaining air pockets and water to complete the process. Congratulations! Your cluster screen is now fully protected with our product.
(Due to personal craft problems, maybe a little bit bubbles is a normal phenomenon.)
Installation:
1. Clean the cluster screen with microfiber cloth to remove dirt and dus;
2.Remove the liner with label Step1.(Make sure that the film doesnt come up with the clear liner)
3.With the liner removed completely, spray liberal amount of water on the adhesive side.
4. Alight the screen protector with button or edge then gently place it on the cluster.
5.Gently squeeze water and air pockets out with squeeze. Try to remove as much water and air pockets as you can.
6.Remove the liner with label Step2.(Make sure that the film remains perfectly aliged and doesnt come up with the top liner.
7.Use squeeze to remove remaining air pockets and water to complete the process. Congratulations! Your cluster screen is now fully protected with our product.
(Due to personal craft problems, maybe a little bit bubbles is a normal phenomenon.)
-
Fruugo ID:
319469615-709616814
-
EAN:
8443220057096
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE USE: Read all instructions and safety warnings before using this product. Failure to follow these guidelines could result in injury, damage, or malfunction.
GENERAL WARNINGS
INTENDED USE: Use this product only for its intended use as described in the user manual.
SUPERVISION REQUIRED: This product is not intended for unsupervised use by children or persons with reduced physical, sensory or mental capabilities.
INSPECT BEFORE USE: Inspect before use for any signs of damage or wear. Do not use if damaged.
