Hole Saw High Speed Steel Three Blades Inclination Angle Design Durable Hole Cutter for Metal with Hex Key28mm

¥2,049
配送料無料

Hole Saw High Speed Steel Three Blades Inclination Angle Design Durable Hole Cutter for Metal with Hex Key28mm

  • ブランド: Unbranded

Hole Saw High Speed Steel Three Blades Inclination Angle Design Durable Hole Cutter for Metal with Hex Key28mm

  • ブランド: Unbranded
希望小売価格: ¥2,649
価格: ¥2,049
得する金額: ¥600 (22%)
販売元:
¥2,049
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Feature:1. [Durable High Speed Steel] Made of high quality high speed steel material, sturdy and durable, long service life.2. [Three Blades Design] Inner, middle and outer three blades design, higher efficiency, not easy to collapse.3. [Inclination Angle Design] Inclination angle design reduces friction and reduces the temperature of the knife.4. [Evacuate Chips Smoothly] Evacuate chips smoothly, greatly reducing jamming and tool breakage, and stable performance.5. [Applicability] Suitable for metal openings such as cast iron, steel plate, thick stainless steel, thick non standard iron, etc.Specification:Item Type: Hole SawMaterial: High Speed SteelHandle Diameter: Approx. 10mm / 0.4inTotal Length: Approx. 90mm / 3.5inWorking Depth: Approx. 25mm / 1.0inUses: Metal Openings for Cast Iron, Steel Plate, Thick Stainless Steel, Thick Non Standard Iron, Etc..Package List:1 x Hole Saw1 x Hex Key1 x Storage BoxNote:1 Check the integrity of the hole drill before use;When the 2 hole drill is installed in the electric drill, the three faces of the corresponding shank should be clamped;Keep the verticality of the hole drill and the workpiece when drilling with a 3 hole drill4 Use a small feed force when starting drilling, and use a medium feed force after positioning;5 When drilling, the speed should not be too low to avoid jamming of the knife edge and causing tool collapse;6 When the center drill drills through the workpiece, the force should not be too large to avoid violent collision between the blade and the workpieceAfter the 7 hole drill drills through the workpiece, the workpiece should be withdrawn while the hole drill is rotating8 When drilling continuously, use cutting fluid to cool the cutting edge.9 Manual measurement, there is an error of 3mm
  • Fruugo ID: 408954919-866292908
  • EAN: 7380328703849

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Warning: Please read the product instructions carefully before use to ensure correct use.
シリアルナンバー: 7380328703849

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 金 17 10月 2025–金 24 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る