Features:Wide supply voltage range: The built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target objects, it will send control signal.High frequency: The proximity switch is widely used in automatic control industry for detecting, controlling, and noncontact switching.Sturdy, small volume, convenient installation. The proximity switch has TVS tube protection and strong antiinterference abilityCan directly connect the transistor and TTLs, and so on logic circuit.This Hall NPN sensor consists of voltage regulator, voltage generator, difference amplifier, Schmitts-trigger and open collectors output. The input are the magnetic induction, the output is a digital voltage signal.Notice:1.Actual color may be slightly different from the image due to different light effect2.Please allow 1-3cm deviation due to manual measurementAppearance: M12mm cylinderOutput: NPN three wire normally open typeThe detection distance: 10 mmSupply voltage: 5-24VDC,6-36VDCOutput current: 200mAObjects can be detected: permanent magnetsSwitching frequency: 320 KHZThe shell material: copper