Microdermabrasion Machine Acne Removal Whitening Skin Rejuvenation Machine Instrument100-240V AU Plug Condition: Item Type: Microdermabrasion Machine Material: ABS Power: 15W Description: Cooperate with skincare products, penetrate into skin surface layer, reaches dermis layer, help supplement natural nutrition, restore cell vitality, promote skin health.The result of treatment is usually a healthy, glowing, beautiful skin. Operation instructions: 1- Please connect all attachments to the machine first. 1) Unscrew the vacuum connector, making sure there is a large cotton filter in the middle and a large black ring around the connector head. 2) Tighten the connector after inspection.Then attach the PVC hose to the connector. 3) Insert the other end of the PVC hose into the end of the rod. 4) Place a small cotton filter on the end of the wand.(Look, there's a little black circle around my head.) 5) Nail the drill stone into the bar (the customer can choose the appropriate size of the head, see the schematic diagram after the head cover) 3- Place the probe on the surface of the skin (starting from the forehead) and slide slowly.Do not stay in one place for too long, as this can cause damage to the skin. 4- Gently stretch the skin with thumb and finger and slide the hand tablet on the treated area for 2-3 times.Then crosses again in a different direction to prevent the stripe lines in the reference picture.Brush or polish actions can be used in different locations. 5- After treatment, wipe off any remaining dead skin with a soft brush and rinse with a wet sponge or cool wet towel. 6- Let your skin dry and then use the skincare products you need.