Item Type: Wire Thread Insert_x000D_Material: SUS304_x000D_Model: M1.6 x 0.35_x000D_Thread Specification: M1.6 x 0.35_x000D_Outside Diameter Before Installation: Approx. 2.1-2.3mm / 0.1-0.1in_x000D_Drilling Drill Bit Diameter: Approx. 1.6mm / 0.1in_x000D_Length After Installation: Approx._x000D_1D: 1.6mm / 0.1in_x000D_1.5D: 2.4mm / 0.1in_x000D_2D: 3.2mm / 0.1in_x000D_2.5D: 4.0mm / 0.2in_x000D_3D: 4.8mm / 0.2in_x000D_Wire Thread Insert Model Description: For Example: M3 x 0.5 x 1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length is 1.5 times the diameter, that is, 1.5 x 3=4.5mm ), the length here refers to the length after installation._x000D_Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, and braces. They are a new type of female thread fasteners made of high-strength, high-accuracy diamond-shaped cross-section steel wire; in aluminum alloy, zinc The application of low-strength engineering materials such as alloys, copper, plastics can significantly improve thread strength and wear resistance. 1The wire thread insert is installed in the screw hole of the metal material workpiece to form a high?accuracy standard female thread. 2When there is a thread processing error or a damaged female thread hole is repaired, the wire thread insert can be used as a repair tool. 3Made of stainless steel, which has good corrosion resistance and is not easy to break when repairing thread holes. 4Convenient and quick to use wire thread inserts for metric and inch threaded hole conversion. 5Commonly used in hydraulic machinery, welding equipment, auto parts, power machinery and furniture, etc.50 x Wire Thread Insert