4Pcs TPMS for for Mazda CX-30 3 (BP) B-Hatch Xev - Tire Pressure Sensor BDEL-37-140 433Mhz Description No sensor programming Required : The Tire Pressure Sensor is new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals. Part Number: BDEL-37-140 MPREHENSIVE VEHICLE COVERAGE Installation Process: 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. 3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. Fit Car: For Mazda 3 (BP)(from -02 to -06) For Mazda B-Hatch Xev(from -09 to 2027-09) For Mazda CX-30(from -11 to -10) Colour:Black Material:ABS Package Contents: 4 x Tire Pressure Sensor Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_