Mini Thermal Tattoo Copier 10pcs Transfer Paper 50ml Printing Gel 2000mAh Battery Tattoo Transfer Printer Black Item Type: Thermal Tattoo Transfer Machine Kit Material: ABS, electronic components 1. Tattoo Transfer Machine Color: Black Battery: Lithium Battery 2000mAh(Included) Input: 5V 2A Charging Port: Type C Interface: USB Transfer Machine Size: Approx. 265 x 58 x 30mm / 10.4 x 2.3 x 1.2in Print Type: Thermal print Automatic Shutdown: 30min Printing Concentration: Light/medium/strong (optional in APP) Standby Time: About 30 days Charging Time: About 1.3 hours Continuous Printing: 90 pieces of tattoo transfer paper Applicable Printing Paper: Standard A4 thermal paper (210x297mm / 8.3 x 11.7in) Support Connected Devices: Phones, tablets Key function: Power button: Press and hold to power on/off, and the indicator is green. When charging, the indicator is green, and when fully charged, the indicator is green steady on. Open cover key: Press the open cover key to open the cover for cleansing and paper stuck treatment. 2. Tattoo Transfer Paper Transfer Paper Size: A4 Transfer Paper Quantity: 10pcs 3. Tattoo Transfer Gel Capacity: 50ml How e: 1. Install APP Scan the code on the box to download the APP. 2. Switch the machine on and off Power on: Press and hold the power button for 2S until the indicator lights up Power off: Hold down the power button for 2S until the indicator is off After starting up, you can connect the printer in the APP. If you cannot connect it, please check whether the machine has power. If there is no power, you can connect it with full power. When the printer is low battery, the green indicator blinks green. 3. Paper feeding operation Tattoo printer paper direction recognition Put the yellow side up and the white side down into the printer input port. The paper can be automatically inhaled. If it is not automatically inhaled, you can also manually open the cover key to feed the paper. 4. Paper stuck, abnormal handling and cleansing Press the open cover button on the right of the host to open the clamshell assembly and rotate at a certain Angle 5. Connect applications After the device is turned on, open the APP, click the "Not connected" button in the upper right corner to enter the Add Device list, click the device to connect it, and then print. Tip: When connecting, make sure your phone is on and your device is close to your phone. 6. Type of printing paper It is recommended e tattoo printing paper, non special printing paper may not be safe, will cause paper jam or paper feed reading is inaccurate, easy to cause skewed printing. 7. Common Problems Q: No connected device is found when I add a device to the APP? A: Please check whether the device is turned on to ensure that the device is working. Q: What can I do if my device cannot print? A: 1. Confirm whether the mobile phone is turned on, and exclude the possibility of others connecting to this device. 2. Check whether tattoo printer paper jam. 3. Whether the print head is overheating, if it is overheating, please wait for the print head to cool before trying to print. Q: Why is the print all white paper, no content? A: It may be caused by incorrect installation of printing paper. Please refer to the introduction of Replacing printing paper to reinstall it. Q: Why did the printed word fade? A: 1. Please check whether the device is low power. 2. To check whether the print head is covered with stains, please gently wipe and cleanse with a cloth.