[ MATERIAL]This Mini pottery machine adopts a mental turntable and never rusts.The speed is stable and you can draw pieces of work. And the application of leakage protection switch at the bottom of the machine can all you a pleasant ceramic experience. [STRONG MOTOR & LOW NOISE]Adopt motor, and the wheel rotates smoothly. 0-300r/min rotating speed, less than 60dB, low noise. Adjustable speed, humanized operation, practical and convenient. [WIDELY USE]Two Turntables, Diameter: 6.5cm/2.56in and 10cm/3.94in,this small professional ceramic wheel machine is specially suitable for school teaching and pottery DIY shop, to satisfy and pottery enthusiasts.This machine is suitable for ceramic pottery throwing and shaping process, ceramic teaching and entertainment. [COMBINING ART & MINI SIZE]Beautiful appearance,Gold Brilliant colors make your mood more enjoyable. The Ceramic wheel machine body spray treatment, structure, small , good shielding, easy operation. Specification: Voltage: AC220V Turntable Diameter: . 6.5cm / 2.56in and 10cm/3.94in Power:30W Load: 0.5 kg No-load speed: 0-2000RPM colour:blue Material:metal size:13*15cm Package Contents: 1 * Ceramic Machine 2 * Turntables 8 * Clay Tool 1 * Power Adapter 1 * Hexagonal Screwdriver Plug Type: EU Plug, it applies to Indonesia, , , , and so on. Suggestions: 1. smaller pieces of 2. 't rotate too fast and slow at a slower speed. 3. When shaping, you can stretch it out a bit thicker and then thin it out slowly. 4. Use clay tools to assist molding, less water.