Material: The mini heat gun is made of high quality ABS plastic on the outside and stainless steel on the inside, heat resistance, low temperature resistance, simple and durable.<br> Easy to Use: Just keep a distance of about 5-6cm from your DIY and heat it at an angle of about 45 degrees to avoid hurting it. Integrated stand for stand-alone and tabletop use.<br> Wearable size: wire length is about 1M / 3Ft, you can make it as you want. Dimension: 225 x 25mm / 8.86 x 0.98 . Ideal for your retail or large DIY jobs.<br> Compact Design: The pencil-shaped design makes this thermal tool ideal for delicate projects. The shed adopts non-slip high-point designs and fits comfortably in your hand.<br> Widely Used: This heat gun is well designed for cup epoxy paint resin to remove bubbles. It is also ideal for embossing, drying paint, paper, fabrics, craft foams,glue, clay, etc.<br> nbsp; Material: ABS + stainless steel<br> - Color: pink<br> - Weight: 285g / Pc<br> - Supply voltage: 220V<br> - Rated power: 300W<br> - Air outlet diameter: 11 mm / 0.4 inches<br> - Temperature range: 200<br> - Product weight: 216g (net weight), 282g<br> - Cable length: 1 m / 3.2 Ft<br> - Product size: 22.5 x 2.5cm / 8.86 x 0.98inch<br> - Package size: 29.5 x 8.5 x 5.0cm / 11.6 x 3.3 x 2.0inch<br> <br> - Application: soft ceramic, convex DIY rubber stamp powder, embossed, heat shrink film<br> <br> The package includes:<br> 1 x Heat gun<br> <br> Features:<br> nbsp; This heat gun is very suitable for getting into hard to reach places and concentrating high heat in a small area to handle all the details.<br> The frosted surface, the shape of the heat gun is more in line with human habits, small and practical, and it will not be tired if you hold it for a long time.<br> The stand design for freestanding and desktop use, which is very convenient to place. If you like DIY, this is a good accessory for you.<br> <br> Tips:<br> 1. Do not use a heat gun to blow directly onto the object at 90 .<br> 2. The single use time of the heat gun should not be too long, usually 2-3 minutes; If you feel the hot air blower body temperature has increased significantly, please turn off the air gunhot and wait for it to cool before using it.<br> 3. The temperature of the heat gun can only reach about 200 , and it cannot be used in industrial applications such as desoldering small iron components and chip integrated circuits.