1. High-efficiency submersible pump: This pump is designed for pumping or transporting liquids. It has a power of 40W and can pump at a rate of up to 2500 liters per hour at a depth of 2.3 meters. Note: The maximum liquid temperature shall not exceed 35 °C. 2. Low water level pump: It can perform flat suction up to 1 cm and can run continuously even at low water levels. The fountain pump runs continuously until it reaches the minimum residual water volume, preventing dry running. 3. Quiet operation: It has lower noise compared to other powerful high-pressure pumps. When used correctly, the water pump is maintenance-free. It must be rinsed with clean water and the dirt and debris on the hydraulic components must be removed. 4. Accessory functions: - It has 3 water outlet nozzles suitable for different pipe diameters (12/16/20 mm). The power cord is about 2.5 meters long. The comfortable carrying handle is very convenient and can be used as a rope rack. It is also equipped with suction cups that can firmly adhere to the ground. 5. Wide applications: - The water supply pump is suitable for draining small ponds and is very suitable for aquariums, rose bushes, hydroponic systems, fish tanks, fountains, ponds, gardens, etc. You can use the pump to increase oxygen content and circulate water. It can be used in water, underwater or outdoors and is suitable for both fresh water and salt water.