Effective Pixel:720X540 Horizontal Sync Frequency:15625KHZ Vertical Sync Frequency:PAL 50HZ/NTSC 60HZ Scanning System:2:1 Interlace Sync System:Internal AGC:Auto BLC:Auto White Balance: Auto Resolution: 520TV Lines S/N Ratio:More Than 48dB Current Consumpition: No more 300mA Power supply: DC12V10% Operating Temperature: -20-60 Rh95% MAX Storage Temperature: -30-60 Rh95% MAX Horizontal Angle: 110 Lens Angle: 170 Water-proof: IP671P68 Minimum Illumination: 0.2Lux/F 1.2(OLux with Led) Night Vision Function: Support Fitment: for Mercedes- for Benz Vito 2004 Onwards for Mercedes- for Benz Viano 2004 Onwards Fitting Instructions: 1.Take out your stock license plate light at the back of your car. 2. Insert the license plate light into the camera. (If non LED) 3.Connect the power cables of the Camera to your Reverse lights - red wire to positive and black wire to negative. 4. Connect the Phono cable of the camera to the extension cord. 5. Connect the extension cord to your Car's Screen / Head Unit. 6. You will see the reverse image automatically when the car is put into reverse Gear (This Depends on your Head unit or screen). 7. Insert the Camera into the license plate light socket. Material:plastic colour:black Package Contents: 1 * Car Rear View Camera 1 * RCA Video Cable 1 * Power Cable Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_