Mortar Machine Automatic Caulking Tool Pointing Grouting Machine Mortar Pointing Grouting Applicator For Brick Stone With Nozzl Bullet Points: 1Funnel Design: The pointing grouting machine adopts a funnel-shaped charging port design, which is convenient for charging and can quickly improve work efficiency. 2Hand-held Labor-saving Design: The tail of the pointing grouting machine adopts a labor-saving bearing design, which greatly improves the working stability and discharging efficiency. 3Detachable Nozzle: Equipped with 4 detachable nozzles, threaded detachable design, flat nozzle, round nozzle, easy to use, different nozzles can be used according to different scenarios. 4Applicable Scene: You can use the cement grouting machine with an air compressor, mortar spray, plaster, plaster, small ladder shotcrete, ground mix, etc. 5Suitable For Narrow Areas: It is also very convenient to use a cement grouting machine to spray in narrower areas, whether it is plaster or mortar, it can be applied quickly and easily. Specification: Name: Mortar Pointing Grouting Material: alloy steel Funnel mouth size: about 20.6*20*14cm/8.11*7.87*5.51inch Handle length: about 12 cm/4.72in Nozzle size: flat mouth 13*38mm/0.51*1.5inch (small), 42*13mm/ 1.65*0.51inch(large) round mouth 22mm/0.87in, 16mm/0.63in, 12mm/0.47in small round joint 13mm/0.51in Product List: 1pcs* electric filling tool (excluding hand drill) 5pcs* alternative nozzles Notes: 1. Due to the different display and lighting effects, the actual color of the product may be slightly different from the color shown in the picture. 2. Due to manual measurement, please allow a measurement deviation of 1-3cm.