Features The driver focuses on power and efficiency, improving engine performance and battery life. Dual DC motor driver module uses two-way half-bridge driver chip + low-impedance N-channel MOSFET elements. The H-bridge driver can withstand high current overloads of up to 30A. MOSFET channels can be opened quickly to improve the engine acceleration curvature and also for fast engine braking. The motor drive module also has a braking function with a booster capacitor on the upper tube. This allows the engine to stop quickly, quickly brake and brake noticeably, which facilitates the implementation of this function. The drive chip has hardware braking function and power feedback function. The driver can operate with a PWM modulation cycle of 0-99% and the motor drive voltage can be fully maintained. The H-bridge driver uses the reliable drive mode of both full half-bridge driver circuits to minimize switching losses of MOSFETs. The utilization of the power supply is improved so that sufficient drive voltage is available for the upper tube. Features: The driver focuses on current and efficiency, motor power and battery life. H-Bridge driver chip can withstand high current overload, the maximum current can reach 30A. This drive also has a braking function can be quickly stopped the engine, brake quickly, obvious braking, easy to implement this feature. The reader uses both half-bridge chip components + low-resistance N-channel MOSFET components. Complete two reliable half-bridge driver mode, MOSFET switching losses to a minimum.Improve power utilization. The MOSFET driver chip is provided with hardware braking function and energy feedback. N-channel IRF3205 MOSFET transistor, use two dedicated half-bridge driver chips on the upper tube using boostrap capacitor, so that the tube has sufficient MOSFET channel control voltage that can be opened quickly, improve the curvature of the engine acceleration, but also the engine brake.This allows the carriage to start quickly and kill the car quickly. The driver can operate at 0-99% of PWM modulation duty ratio, motor control voltage can be obtained sufficiently. Features: Condition: 100% brand new Motor Forward: DIR = 1 PWM = PWM Engine reversal: DIR = 0 PWM = PWM Parking brake: DIR = X PWM = 0 (X is an arbitrary state) Engine and power connections POWER connected to positive power supply, GND power is negative.Two motors were connected MOTOR1, MOTOR2 Rated voltage: 3v-36v (can be customized according to user) Rated current: 10A. Peak current: 30A Size: approx. 108 x 58 mm/4.3 x 2.3 inches (L x W). Package contents: 1 x MOSFE dual motor driver module board Package List