If you have any problems, please contact with us, we will try our best to deal with it. Fitment: For YAMAHA FZ8{nonABS}(2010-2015) For YAMAHA Bolt{non-ABS}(2013-2016) For YAMAHA YZF-R1(2001-2008) For YAMAHA Bt1100 Bulldog(2002-2006) For YAMAHA Dlverslon{non-ABS} (2009-2015) For YAMAHA Dyag Star(1999-2006) For YAMAHA Fjr1300{non-ABS}(2001-2005 For YAMAHA Fjr1300{ABS}(2003-2005 For YAMAHA Fz-16/FZ-S(2008-2015) For YAMAHA Fz400(1997-2002) For YAMAHA Fz6{non-ABS}(2004-2012) For YAMAHA FZ6r(2009-2016) For YAMAHA Stryker(2011-2016) For YAMAHA Fz8{non-ABS}(2010-2015) For YAMAHA Fz1(2001-2016) For YAMAHA Fzh150(2015) For YAMAHA Fzn150(2015) For YAMAHA Fz1n 2006 For YAMAHA Fzs1000 Fazer(2005-2015) For YAMAHA Mt-01(2005-2012) For YAMAHA Mt-03{non-ABS}(2006-2016) For YAMAHA Ralder(2006-2016) For YAMAHA Roadllner(2006-2015) For YAMAHA Road Star(1999-2014) For YAMAHA Royal Star{All Varlants}(1996-2013) For YAMAHA V-Star{950cc and above}(All) For YAMAHA Warrior(2002-2012) For YAMAHA Wr250r/x(2008-2016) For YAMAHA Wr450r/x(2008) For YAMAHA Xt660(2004-2015) For YAMAHA Xv1600A wlld star(1999-2005) For YAMAHA Xvs950A Mldnlght Star(2009-2016) For YAMAHA Xvs1300A Mldnlght Star(2007-2015) For YAMAHA Yzf-R6(2001-2016) For YAMAHA Yzf-R6s(2006-2009) For YAMAHA Stratollner(2006-2015) For YAMAHA TDM900{non-ABS}(2002-2013) For YAMAHA TDM900{ABS}(2002-2006) For YAMAHA Xj6{non-ABS}(2009-2015) For YAMAHA Xjr400(2002-2007) For YAMAHA Xjr1300(2004-2016) For YAMAHA Xv1900A Mldnlght Star(2006-2015) For YAMAHA Xvs1100 Drag Star(1999-2006) For YAMAHA Ys250 Fazer(All) (If you encounter any questions, please be sure to contact me first, please do not leave negative comments first, I very much hope to answer your questions, thank you) Description: Condition:100% Brand New Color of Light Source: Red/Blue/green/white/orange Item Name:Speed Gear Display Indicator Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch Feature: Shows current gear number Indicates current gear from 1 to max of 6. as well as a neutral indicator. Detects the current gear faster than other gear indicators that use speedometer/tachometer signal. Display can be mounted anywhere Installation: To find the gear display plug as Smoku technology to the product and then connected to a power line and speed signal line is inserted in the tank below!When the monitor is in place,check that the cable is not subject to steering damage! Steps: -You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear. -Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. (If you do not have a stand, you may setup the unit while riding. Find a long, straight road with light traffic.) -the screen displays L, indicating that learning is started. - The screen displays L, select first gear, release the clutch, and keep the speed higher than the idle speed. - The display will flash ;1;. Continue to maintain the first gear, accelerate. When the device is learning a gear, the display flashes faster. - When the display shows ;2;, select the second gear and continue to accelerate. - When the display shows ;3;, select the third gear and continue to accelerate. - Repeat this process until all gears are thought (5 or 6). The unit is programmed and should indicate the gears correctly. Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.