If you have any problems, please contact with us, we will try our best to deal with it. Fitment: For YAMAHA FZ8{nonABS}(2010-2015) For YAMAHA Bolt{non-ABS}(2013-2016) For YAMAHA YZF-R1(1999-2008) For YAMAHA Bt1100 Bulldog(2002-2006) For YAMAHA Dlverslon{non-ABS} (2009-2015) For YAMAHA Dyag Star(1999-2006) For YAMAHA Fjr1300{non-ABS}(2001-2005 For YAMAHA Fjr1300{ABS}(2003-2005 For YAMAHA Fz-16/FZ-S(2008-2015) For YAMAHA Fz400(1997-2002) For YAMAHA Fz6{non-ABS}(2003-2012) For YAMAHA FZ6r(2009-2016) For YAMAHA Stryker(2011-2016) For YAMAHA Fz8{non-ABS}(2010-2015) For YAMAHA Fz1(2001-2016) For YAMAHA Fzh150(2015) For YAMAHA Fzn150(2015) For YAMAHA Fz1n 2006 For YAMAHA Fzs600 Fazer(1998-2003) For YAMAHA Fzs1000 Fazer(2005-2015) For YAMAHA Mt-01(2005-2012) For YAMAHA Mt-03{non-ABS}(2006-2016) For YAMAHA Ralder(2006-2016) For YAMAHA Roadllner(2006-2015) For YAMAHA Road Star(1999-2014) For YAMAHA Royal Star{All Varlants}(1996-2013) For YAMAHA V-Star{950cc and above}(All) For YAMAHA Warrior(2002-2012) For YAMAHA Wr250r/x(2008-2016) For YAMAHA Wr450r/x(2008) For YAMAHA Xt660(2004-2015) For YAMAHA Xv1600A wlld star(1999-2005) For YAMAHA Xvs950A Mldnlght Star(2009-2016) For YAMAHA Xvs1300A Mldnlght Star(2007-2015) For YAMAHA Yzf-R6(2001-2016) For YAMAHA Yzf-R6s(2006-2009) For YAMAHA Stratollner(2006-2015) For YAMAHA TDM900{non-ABS}(2002-2013) For YAMAHA TDM900{ABS}(2002-2006) For YAMAHA Xj6{non-ABS}(2009-2015) For YAMAHA Xjr400(2002-2007) For YAMAHA Xjr1300(2004-2016) For YAMAHA Xv1900A Mldnlght Star(2006-2015) For YAMAHA Xvs1100 Drag Star(1999-2006) For YAMAHA Ys250 Fazer(All) Fits EFI motorcycles. if you encounter any problems, please do contact me first, I very much hope to help you solve the problem, thank you Description: Condition:100% Brand New Item Name:Speed Gear Display Indicator Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch Feature: Shows current gear number Indicates current gear from 1 to max of 6. as well as a neutral indicator. Detects the current gear faster than other gear indicators that use speedometer/tachometer signal. Display can be mounted anywhere Install: To find the gear display plug as Smoku technology to the product and then connected to a power line and speed signal line is inserted in the tank below!When the monitor is in place,check that the cable is not subject to steering damage! Set up: -You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear. -Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. (If you do not have a stand, you may setup the unit while riding. Find a long, straight road with light traffic.) the screen displays L, indicating that learning is started. accelerate through the handle throttle slowly -The display will blink 1.Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear. -When the display shows 2, select second gear. Repeat this process until all gears are thought (5 or 6). The unit is programmed and should indicate the gears correctly.