Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V

¥9,090
+ 配送料¥2,149

Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V

  • ブランド: Unbranded

Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V

  • ブランド: Unbranded
希望小売価格: ¥12,590
価格: ¥9,090
得する金額: ¥3,500 (27%)
販売元:
¥9,090
+ 配送料¥2,149

在庫あり

以下の支払い方法を利用することができます

説明

Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V Item Type: Laminator Machine Material: ABS Model: FN336 Power Consumption: 300W Film Rewind: Push the ABS toggle key to remove the film. Laminating Size: A4 to 3 Inch Heating Method: Quartz Heating Wire Laminating Width: Approx. 230mm / 9.06in (A4) Laminating Thickness: Approx. 0.1-0.5mm / 0.004-0.02in Preheating Time: 1-2min Temperature Range: 115℃-145℃ Lamination Speed: 320mm/min Noise Level: ≤55db How e: Non stick paper, foggy white pieces. 1. Not complete the preheating, the temperature is not enough, wait for the over-molding machine to complete the preheating (green light) and then used 2. Thickness gear is not correct, select a higher gear, warming ready to be molded again. No working or heating of the overmolding machine. 1. The power supply is not suitable, please check the power supply specification before powering on the over molding machine. 2. The switch is not set to on or hot mode, set the switch to on or hot mode. Bubbles, wrinkles, bent photos 1. Incorrect thickness gear, select a lower gear, cool down the temperature and get ready before molding. 2. The rubber rollers of the plasticizer are not flat and there are debris, check the rubber rollers and clean them. 3. Plasticized objects are not placed on the level, there are debris, plasticizing before removing debris, put the objects on the level and then plasticized! What should I do if there is a paper jam in the plasticizer? 1. Not correctly feed the paper, the rubber rollers on the foreign body, switch off and hold down the ABS key for the film, clean the rubber rollers Smoke over the plastic machine. 1. Normal vulcanization of the new machine imagined, a normal phenomenon of the new machine, more than a few times will disappear! 2. Power supply voltage does not match (burnt flavor), plastic machine before powering up, please check the power supply specifications before powering up.
  • ブランド: Unbranded
  • カテゴリー: ラミネーター
  • 色: Solid
  • サイズ: Normal
  • Fruugo ID: 432830569-908749230
  • EAN: 4631308466005

配送と返品

24時間以内に発送

  • EXPRESS: ¥2,149 - による配達 月 17 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る