Lithium Battery Pack Expansion Board 5.1V 2.5A Outdoor Portable Power Supply UPS HAT Board for Raspberry Pi with Self-Recovery Fuse 1LN9D

¥7,190
配送料無料

Lithium Battery Pack Expansion Board 5.1V 2.5A Outdoor Portable Power Supply UPS HAT Board for Raspberry Pi with Self-Recovery Fuse 1LN9D

  • ブランド: Unbranded

Lithium Battery Pack Expansion Board 5.1V 2.5A Outdoor Portable Power Supply UPS HAT Board for Raspberry Pi with Self-Recovery Fuse 1LN9D

  • ブランド: Unbranded
希望小売価格: ¥9,090
価格: ¥7,190
得する金額: ¥1,900 (20%)
販売元:
¥7,190
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Features Two working modes: Lithium battery expansion board is divided into two working modes, outdoor portable power supply and indoor UPS power supply. PMU over-discharge protection: When the voltage of the lithium battery is lower than 2.8V, the PMU judges that the battery has been over-discharged and automatically cuts off the 5V output. Use: When the total current of the 2 USB output ports of the UPS board reaches 3A, the self-recovery fuse is blown. When the external port is empty, the 5V output will automatically recover Self-recovery fuse: Raspberry Pi battery expansion boardd The external output port has a self-recovery fuse to prevent the Raspberry Pi from being burned out by a short circuit. The motherboard integrates overcurrent and Maximum external power supply capacity: As an outdoor portable power supply, the motherboard is powered by lithium batteries only, and the maximum external power supply capacity is 5.1V 2.5A. As an indoor UPS power supply: Plug the Micro-USB into an ordinary 5V 2A power adapter, and the external output USB-A interface can output up to 5.1V 3A. protection. Features: 1. Two working modes: divided into outdoor portable power supply and indoor UPS power supply. 2. As outdoor portable power supply, the motherboard is only powered by lithium battery. The maximum external power supply capacity is 5.1V 2.5A. 3. As indoor UPS power supply: insert Micro-USB into ordinary 5V 2A Power adapter, and the external output USB-A interface can output a maximum of 5.1V 3A. 4. 4+2LED for charging and discharging, and battery power display. 5. The motherboard integrates overcurrent and overdischarge protection. 6. The external output port has a self-recovery fuse to prevent the for Raspberry Pi from being burnt due to an external short circuit. 7. When the total current of 2 USB output ports reaches 3A, the self-recovery fuse will be fusing. When the external port is no load, the 5V output will automatically restore.   Specification: Condition: 100% brand new Battery: 1 x 3.7V 4000mAh lithiium battery Package Weight: Approx. 122g/4.3oz   Package list: 1 x Lithium Battery Expansion Board 1 x Lithium Battery 1 x Set of Installation Accessories Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List
  • Fruugo ID: 383660634-825850484
  • EAN: 9789622020757

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
材料: As shown in the figure

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 火 28 10月 2025–月 03 11月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る