Remote Control Switch Wireless Long Range Kit PCB 18 Way 23A Battery Model Official 1 to 1DC12V Item Type: Remote Control Switch Material: PCB Working Frequency: 315MHZ; 433MHZ (default 315MHZ) Working Method: Point M4; Self Lock T4; interlock L4; point movement and Self Locking coexistence Occode Mode: Intelligent Learning Type Working Environment: -40 ~ + 80 Degrees Receive Sensitivity: ≥ 105DBM Output Current Sensing ≤ 3.5A: Resistance ≤ 6A Battery Model: 23A ( Excluded) This receiver has the following five types of working methods, all of the 18 ways, all Self Locking 18 ways, all interlocks 18 ways, separate a few ways to move Self Locking interlocks. <Can change work according to your own needs,see the description below for details)1, Pick Up: Press the remote control 2 key to learn < function literal Translation:, Press and hold the remote control button will work, loosen will stop!> 2, Self-Lock: Press the remote control No. 1 to learn < function literal translation: The receiver's opening and closing of the receiver is completed on the same button on the remote control, press the remote control button first down to open, the second is off, the third is open, the fourth is off, loop like this!>3, Interlock: Press the remote control 3 key to learn < function direct translation: Press the remote control A key to open the B key as the shutdown or the A button is open. If the remote control is a plurality of buttons, which button is learned, which button is open, all other buttons are all off!> 4, 1-9 Self Locking. 10-18 ways point Movement: Press the remote control No.4 to learn 5, 1 road is Self-Locking. 2-18 ways Point: Press the remote control 5 key learning Increase or clear remote control instructions 1. Learning: Press the learning key light on the receiver to let go, enter the learning status; select a key learning according to the remote control according to the function you need, and the receiver has a signal after receiving the signal to about 1 time,which means learning success. 2, Can learn 2262, 2260, 1527 chip equivalents of different address codes, etc 3, Clear Code: Long press the learning key on the receiver to about 8 seconds until the indicator is off, indicating that the cleared success