Features: Metal leather tools are suitable for handmade DY wallets, bags, hats, decorations, etc. Specifications:Handle Material: Stainless Steel Head Material: AlloySize: 10mm/0.39 inchSeries:Insect: 8 Patterns, Size: 10mm/0.39 inchTotem: 8 Patterns, Size: 10mm/0.39inAdventurer: 8 Patterns, Size: 10mm/0.39inHappy Time: 8 Patterns, Size: 10mm/0.39inTips:1. When punching holes, the holes must be perpendicular to the surface of the skin to prevent improper operation of interrupting tooth incision.2. Do not use a hammer in a hammer, use a rubber hammer or install a hammer.3. It is better to use soft pads under the skin to protect the tip. It is recommended to use a spill plate or a hole blinding plate.4. When metal tools are not in use, the new room may be covered with a layer of oil and covered with a rubber case for protection and maintenance. Notes:1. Due to the different monitor and light effect, the actual color of the item may be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3mm measurement deviation due to manual measurement.1 Set X Printing Leather Pneumatic Punch [Relateproductdetail/]