Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L )

¥15,690
配送料無料

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L )

  • ブランド: Unbranded

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L )

  • ブランド: Unbranded
希望小売価格: ¥17,590
価格: ¥15,690
得する金額: ¥1,900 (10%)
販売元:
¥15,690
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Features 1、This is a double‑acting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s. 2、The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work. 3、The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder. 4、The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments. 5、The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes. Specification Condition: 100% Brand New Item Type: Cylinder Material: Aluminum Alloy Color: As Pictures Shown Optional Type: ACK63-90R, ACK63-90L Inner Diameter: Approx. 63mm / 2.5in Piston Rod Outer Diameter: Approx. 20mm / 0.8in Action Type: Double Action Working Medium: Air (filtered by a Filter Screen Above 40μm) Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi) Guaranteed Pressure Resistance: 1.5MPa (215psi) Working Temperature (℃): -20-80 Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s Travel Tolerance Range: 1.0 Rotation Angle Tolerance Range: Approx. ±1.5° Buffer Type: None Take over Caliber: PT1/8 Installation and Use 1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke. 2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece. 3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder. 4. The medium used in the cylinder should be filtered by a filter element above 40μm before use. 5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod. Package List 1 x Cylinder
  • Fruugo ID: 330916547-730084744
  • EAN: 9308869049972

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 月 20 10月 2025–金 24 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る