Release handle pins fit for packout rolling tool box Our release handle pins is made of high-quality metal, which is stable and not easy to break, safe and reliable, and more durable for long-term use. After installing the release handle pins, you can adjust the height of the handle and put your for packout rolling tool box on the car or other . The package including 2 x Handle Pins, 1 x 7/32 in or 5mm Drill Bit, 1 x Threaded Bolt The handle release kit for the packout rolling tool box can be installed in minutes. STEP1:Remove the 2 screws located on the back that hold the handle in place.Then remove the handle STEP2:Using the included 7/32in or 5mm drill bit,enlarge the 2 screw holes STEP3:Using the included M6-1.0 threaded bolt to tap out and create threads in the holes. STEP4:Install the 2 handle pins in the screw holes. Colour:silver Material:Stainless steel Package Contents: 1 set x pin tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.