The moisture meter can quickly measure the moisture content of the grain. 1. Precise temperature control: two temperature control buttons for easy temperature increase or decrease, LED digital temperature display, convenient for adjustment. 2. Safe to use: The temperature sensor directly determines the temperature of the insert. Precisely control the temperature when the wax completely melts, the machine will reach a constant temperature to avoid burning the skin with high temperature. 3. Review the wax heater cover: At any time, you can observe the melting state of the wax, there is a ventilation hole on the cover, which facilitates heat dissipation. 4. Silicone Wax Melting Crucible: Foldable and easy to clean. It is suitable for heating all types of wax, including wax, canned wax, wax blocks, paraffin wax. 5. Material ABS and aluminum: exquisite and fashionable appearance, beautiful and practical. It adopts ABS material and aluminum, strong and durable, durable to use. Specification: Item Type: Hair Removal Wax Heater Material: ABS, silicone, aluminium Product Size: Length: ok. 19,5 cm / 7,7 inch Width: Ok. 17,3 cm / 6,8 inch Height: Ok. 13,3 cm / 5,2 inch Voltage: 100-240 v Power: 100 in Internal tank capacity: 500 ml Temperature: 35-120 List of packages: 1 x Wax Pot (with Lid) 1 x Silicone Bowl 1 x Manual Note: 1. Do not place ani do not store the unit in a place where it could be dropped or pulled into a bathtub or sink.2. Do not put the device in water or other liquids.3. Please use the device in a dry place. If the device falls into the water, immediately disconnect it from the power supply. Do not put your hands in water.4 If the equipment is damaged (including cable damage), do not use it arbitrarily to avoid the danger of burns, electric shock and fire. Disconnect the device when not in use. Make sure the machine is completely cool before hanging, washing or storing.6. Do not allow children to touch the device. This unit cannot be used to boil water.7. 1. Turn on the power and the device will be ready. Turn on the switch button and the buzzer will sound. The display will show the last set temperature. The machine will enter working condition.2. Shutdown: In working state, turn off the switch button. There will also be a buzzer. The light will light up. Other indicators and digital displays will be disabled. Then enter standby mode.3. Temperature setting: In the working state, press the "" or "-" button to set the temperature. When the temperature setting is complete, the machine enters the working state. The switch button is red when heating and green when keeping warm. Instructions: 1. Remove the lid, add the right amount of wax or canned wax, put in the tank, turn on the power, and the product is on standby.2. Set the heating temperature3. When the wax completely melts, the machine will reach a constant temperature.4. Za a wooden stick, apply melting wax to the area ma be depilated5. After the wax has cooled and dried, peel it off