6-48V Battery Charging Controller Module for Undervoltage Control Over discharge Protection

¥2,399
配送料無料

6-48V Battery Charging Controller Module for Undervoltage Control Over discharge Protection

  • ブランド: Unbranded

6-48V Battery Charging Controller Module for Undervoltage Control Over discharge Protection

  • ブランド: Unbranded
希望小売価格: ¥3,149
価格: ¥2,399
得する金額: ¥750 (23%)
販売元:
¥2,399
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Specifications: This battery charging controller has the function of parameters adjustable, power failure memory function. Whenthe battery is under voltage, disconnect the load and connect the charger. When the battery is over voltage, disconnect the charger and connect the load. Features: Whenthe battery is under voltage, disconnect the load and connect the charger. When the battery is over voltage, disconnect the charger and connect the load. This battery charging controller has the function of parameters adjustable, power failure memory function. The control voltage is 10V-60V, and with high accuracy of 0.1V. This battery charging controller is suitable for storage battery, lithium battery, etc. This charging controller protects battery undervoltage, protects battery overcharge, protects load control. Specifications: Model: YX815Control voltage: 10V-60VControl current: 20AControl accuracy: 0.1VVoltage error: 0.1VScope: storage battery, lithium battery, etcPacking: antistatic bag Size: 7.9 x 4.3 x 2.8cm/3.11 x 1.69 x 1.10inchInstallation size: 76 x 39.5mm/2.99 x 1.56inch Weight: 44g Voltage setting method:In setting state(digital tube flashes)S1: up-regulated voltageS2: down-regulated voltageS1 undervoltage setting button (charging startup, load stop):1.Under normal display voltage, press the S1 button to display the charging start(load stop )voltage value.2.Longpress the s1 button digital lamp tube flashing, and set charging startup voltageload stop value through s1 and s2 buttons.S2overvoltage setting button (charging stop, load start):1.Under normal display voltage, press the S2 button to display the charging stop load start upvoltage value.2.Long press s2 button digital lamp tube flashing, through s1 and s2 buttons to set charging stop load start upvoltage value.Restore factory Settings:Underthe state of electricity, press the buttons of s1 and s2 at the same time, and the digital tube displays 888, that is to restore the originalfactory setting success.(Note: when s1 cannot up regulate the voltage, set s2 first, and s2 cannot down regulate the voltage, set s1 first)Package Included: 1 x Battery Charging Controller Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
  • Fruugo ID: 408524401-865554483
  • EAN: 7380328386592

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Warning: Please read the product instructions carefully before use to ensure correct use.
シリアルナンバー: 7380328386592

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 水 08 10月 2025–水 15 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る