Feature:1. The input and output screw terminal block of the host, the control terminal uses 2.54MM pins, and the wiring is convenient.2. The control can be directly connected to the microcontroller IO, and the MCU can use PWM to control the motor speed, light brightness, etc.3. The board uses optical isolation, completely separated from the 2 terminal voltage.4. The input is controlled by 2-pin control, and the ground control can be directly connected to the control switch.5. Control current 1-5MA control voltage is different, the current difference is mainly the loss on the LED.Specification:Condition: 100 percent Brand NewItem Type: MOSFET Switching ModuleMaterial: Synthetic PaperboardColor: As picture shownInput Control Voltage: DC 3.3V-12VOutput Charging Voltage: DC 5-36VControl Current: 1-5MACharging Large Current: 22A.Package List:1 x MOSFET Switching Module