Flexible and comfortable: the karmic adjustment screw consists of a large screw, which is not easy to loosen with a seal. The large screw of the wrench is equipped with an Allen key hole (M6), which can be disassembled and assembled flexibly and conveniently by hand.<br> Adjustable angle: the key for angle grinder can be adjusted. The size of the rotating nut can be adjusted and the adjustable distance is 10-46 mm.<br> Robust and durable: the small cylinder at the front end of the angle grinder wrench has a thickness of 4.8 mm, which is not easy to slip and break and can better close the sliding claw and worm wheel. The substrate thickness is up to 3.2 mm, which can be better used for loosening or tightening the worm wheel with an angle grinder wrench.<br> Interference free design: the slanted design on the back of the angle grinder wrench is humanized, and the screws are flat, which does not cause interference when using. At the same time, the key can disassemble the grinding wheel faster, which is practical and beautiful.<br> Wide use: our wrenches are suitable for changing the grinding discs or discs of different types of angle grinders, such as table grinders, large cut-off grinders, mitre grinders and marble machines.