Specification:<br> <br> Model: LD-600S<br> <br> Rated current: 0.3A/0.8A<br> <br> US Type: 120V,60Hz<br> <br> Input: 220~240V ac, 50/60Hz, 0.8A<br> <br> Output: 25~150W Incandescent Lamps / Tungslen Filament Lamp<br> <br> EU Output: 3-25W LED Driver / LED light / LED Bulb<br> <br> TypeUS/EU<br> <br> Switch Type: 3 way touch dimming dimming/ON OFF<br> <br> Size48.2*32*16mm<br> <br> Approval: TUV/EMC/CE/SAA<br> <br> <br> Touch switch connection:<br> <br> Black with wire eared conductor<br> <br> Red line connects one of the light bulbs<br> <br> Brown wire connector wire L pole<br> <br> The blue line is a common line, and the other line of the bulb and the plug line N pole are connected.<br> <br> <br> A Small transparent touch switch head:<br> <br> White line: light line (the foot line on the board)<br> <br> Long foot: positive (white line on the board)<br> <br> Short foot: negative (black line on the board)<br> <br> <br> B Plastic touch switch head:<br> <br> Middle foot: touch the foot<br> <br> +: positive<br> <br> -:negative electrode<br> <br> <br> <br> Package included1 x Switch touch<br> <br> <br> Note:<br> <br> 1.Under the influence of light and the display, the color difference may decrease slightly.<br> <br> 2.Due to manual measurement, please allow size differences about 1-3cm. Thank you for your understanding