Package and Size: You will receive 1 roll wash away embroidery stabilizer. Size: about 250mm/9.84inch wide, 30 yards(27.4m)/roll. The rolled design means you can make free cuts. Sufficient quantities are enough for you and your family to use. Quality Material: Made of high quality PVA skin-friendly material, strong and stable enough to provide a firm support for embroidery projects and the quality material also helps the stabilizer withstand repeated stitching. Note: The product is non-adhesive, so please be aware of this before purchasing. Dissolved Immediately: This lightweight water soluble film will be easily removed by mist or water, print, copy or draw your design on water-soluble paper embroidery stabilizer; then peel off the release sheet and adhere the design in place for hand or machine embroidery; when finished, soak in cold water to quickly dissolve the excess. Easy to Use: Cut out to size, simply cover the main fabric and hoop with an embroidery hoop (For embroidery hoops 9 x 9 inches/22x22 cm and smaller) and then embroider, when finished, remove the large edges of the film and rinse off the rest with warm water at room temperature. Wide Application: This stabilizer is applicable for machine and hoop embroidery projects, suitable for fleece, towels, soft knits, terry cloths and other fluffy materials, perfect for DIY projects including applique, quilting, needle punch, hand work, hoop embroidery. It can also be used as a stabilizer, either as a backing or a topper.