Led Cabinet Lighting With Motion Detector (3 Pieces) MOTION SENSOR LED: Cabinet light is LED light with PIR motion sensor. When the cabinet lighting detects movement of approximately 4 meters / 100 , the lighting is immediately switched on. If no movement is detected, the light will automatically turn off in 13 seconds.CONVENIENT FOR CHARGING: Can be charged anywhere and anytime using any 5V USB device (eg, USB adapter, power bank, laptop) and the connected charging cable. With fast charging USB, you can avoid wasting money on the battery and save more.2 INSTALLATION METHODS: Built-in magnet behind cabinet light, which can be directly adsorbed on any iron surface. With the magnetic strip attached, peel off the double-sided adhesive tape to adhere to the place where the lamp is to be installed, then connect the light sensor of the LED box to the magnetic strip, it can be attached anywhere.DETACHABLE AND EASY TO USE: They are so convenient that you can place them anywhere. That it can be easily removed and put back on when the battery LED bar needs to be charged. It is not a hard-wired device, so you don't have to worry about the high cost of wiring around the house.