1STABLE AND RELIABLE: Using photoelectric integrated modules provides good optical and electrical characteristics to ensure stable and reliable data transmission. 2DATA TRANSMISSION: The transceiver converts the twisted pair electrical signal and optical signal to each other to ensure the smooth transmission of data packets between the two networks. 3EXTEND TRANSMISSION DISTANCE: The single fiber transceiver extends the transmission distance limit of the network from 150 meters of copper wire to 20 kilometers. 4WIDELY COMPATIBLE: Suitable for a variety of working environments, community networks, campus enterprise networks, fiber optic users, intelligent broadband, surveillance security and other fields. 5INTERFACE DESIGN: With a UTP RJ45 interface and an SC interface, the transmission rate of the electrical interface is 10/100/1000Mbps, and the optical interface is 1.25Gbps. Item Type: Fiber Transceiver Material: Aluminum Alloy Uses: Parking lot access control, fiber to the home, radio and television broadcasting, security monitoring Support Language: English Basic Parameters: Standard Protocol: IEEE802.3Z/AB 1000Base-T/SX/LX Transmission Rate: Electrical Interface: 10/100/1000Mbps Optical Fiber Interface: 1.25Gbps Interface: One UTP RJ-45 interface, one SC interface Operation Mode: Full duplex mode or half duplex mode Ambient Temperature: 0-60 Relative Humidity: 5%-90% TP Cable: 5E, CAT6 Transmission Fiber: Multi Mode: 50/125, 62.5/125m Single Mode: 8.3/125, 8.7/125, 9/125 or 10/125m 1 x Transceiver A 1 x Transceiver B 2 x Power Adapter 1 x Manual Fiber transceivers also need to be used in pairs, but regardless of receiving end and transmitting end, fiber cross connection, SC port to SC port connection mode, RX is the receiving port of the optical module, TX is the transmit port.