Features: 1.To help you easily make hemming with a hemming width less than 7mm, you can use straight stitches, zigzag stitches or decorative stitches. 2.Made of high quality stainless steel materials, wear?resistant and durable. 3.Reasonable size and light weight for easy storage and carrying. 4.Applicable models: XL2600 / BM2600 / XL5500 / XL5600 / BC2500 / ES2400 / NV30 / NV400 / NV1200 / NV4000 5.Simple installation and easy to use, it is an essential part of the flat sewing machine. specification:Description: Help you easily making trim width of less than 7mm edging, you can use a straight stitch, zigzag stitch or decorative stitches. Use Instructions: 1. Before installing the presser foot, turn the trim strip inserted into the guide groove of the presser foot, trim selvage ensure alignment of the presser foot guide groove; 2. Pull the trim strip from the rear of the presser foot; 3. Install the presser foot; 4. Adjust the needle position, until the needle point is located at the edge trim. Tip: If you can not adjust the needle to the appropriate location on the trim, you can loosen the presser foot screw and move around to adjust the position of the guide groove. s: Material: Stainless steel Color: Sliver Package Include: 1 x Bias Binder Tape Binding Foot Notice: 1. Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid. 2. The color may have different as the difference display,pls understand