Features:Internal self-calibration, no calibration required.High reliability and long-term stability.The soil temperature and humidity sensor is digital output with a resolution of up to 14 bits.The combination of temperature and humidity is convenient for dew point measurement.Product structure exquisite, I2C output, suitable for on-site application and product integration. Because the brass structure can be used in high temperature and high humidity environment, the temperature resistance is higher than the plastic shell.The use of aviation joint provides better dust-proof, anti-rain-proof,in customer maintenance can be directly replaced probe, do not need to repeat wiring.Application range: computer room monitoring, HVAC, weather station, warehouse, construction site, concrete test block testing, agricultural greenhouse, flower nursery, etc.Specification:Item Type:Soil SensorWorking Current:<10maTemperature Measuring Range:-20~100Humidity Measurement Range: 0~100%RhWorking Conditions: - 40 C ~ 125 C, 0 ~ 99% RhStorage Conditions: - 20 C ~ 80 C, 0 ~ 95% RhLine Length:150cm / 59.06inWeight: 128g / 4.52 Oz(Approx.)FS200-SHT3X series(Optional)Humidity accuracy %RHTemperature accuracy CVoltage VSHT3020.23.3-5SHT3120.23.3-5SHT351.50.13.3-5Package List:1 x Sensor1 x Wire MarkerNote:Relative humidity of air is a function of temperature. Air temperature has a great influence on relative humidity. Various compounds such as acid and alkali salts have a significant impact on the physical properties of water vapour. The following items should be noted when using:1. The temperature and humidity sensor should be installed in a place where the temperature is relatively stable and most representative of the measured ambient temperature and humidity.2. Avoid installation in places where the temperature changes drastically.3. Avoid installation in places where the air is flowing intensively.4. Avoid installing dead corners where air does not flow. 5. Avoid using it in a salt spray environment.6. Avoid use in corrosive gas environments.Working Condition:The sensor has normal performance within the recommended operating range. Long-term exposure to conditions outside the normal range, especially at humidity >80%, may result in temporary signal drift (after 60 hours drift +3% RH). When returning to normal After the working conditions, the sensor will slowly return to the calibration state. Prolonged use under abnormal conditions will accelerate the aging of the product.Humidity sensors are not ordinary electronic components and require careful protection. This must be taken seriously by users. Prolonged exposure to high concentrations of chemical vapour will cause the sensor reading to drift.