1. Most potted plant deaths are caused by water shortage or excessive watering. This lovely soil humidity sensor will whistle when the soil is short of water to remind you to water the plants. So you 't have to too much for fear of water shortage. 2. 't bother to look at the numbers on indicators, when they call, and make your life easier. 3. Cute design can be used as an ornament for flowerpots to make your garden more beautiful. 4. It's very simple to use. Just pull out the plastic sheet at the bottom and it will start to work. When you just insert it into the soil, it will make the calls of birds or frogs, moisture is detected in the soil, it will stop singing. 5. The standard size button battery can year. At the same time, there is a light sensor at the bottom of the product, which will stop working at night to avoid disturbing your rest. After removing the transparent film behind the bird , the battery will be electrified. If you to turn off the singing function, Press two probes at the same time, or insert the probes into the wettest soil. After inserting the probe of the humidity sensor into the soil, the singing should stop after a moment. If the singing continues, water your potted plants. The built-in automatic optical sensor will automatically turn off the singing reminder function at night, it will still automatically sing when it senses sunlight to indicate sufficient power. Watering: Watering is required 15 seconds when singing. Colour:Yellow Material:Resin Size:18*9cm Package Contents: 1*Soil Moisture Meter Note: Fine abrasive paper and steel may be required to clean the tip of the probe regularly. It can sense the pH value of the soil and detect whether the soil fertility is too low. Ifyou continue to sing after watering, check the pH value of the soil. The pH value of indoor plants should be between 3 and 8. Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.