Stainless Steel Viscosity Cup for Paint and Oil Finishes, 1-5 Flow Measurement Tool

¥4,949
+ 配送料¥1,399

Stainless Steel Viscosity Cup for Paint and Oil Finishes, 1-5 Flow Measurement Tool

  • ブランド: Unbranded

Stainless Steel Viscosity Cup for Paint and Oil Finishes, 1-5 Flow Measurement Tool

  • ブランド: Unbranded
希望小売価格: ¥10,890
価格: ¥4,949
得する金額: ¥5,941 (54%)
販売元:
¥4,949
+ 配送料¥1,399

在庫あり

以下の支払い方法を利用することができます

説明

Origin: Mainland China Cup body material: Stainless steel Number of cups: 1, 2, 3, 4, 5 Cup size: Approximately 44ml Total length: Approximately 345mm Cup inner diameter: Approximately 33mm Cup height: Approximately 57mm Product Usage: The immersion Zahn cup viscosity cup is manufactured in accordance with the American Society for Testing and Materials (ASTM) D4212-93 standard, Standard Test Method for Dip Viscometers. This viscosity cup is designed for measuring the viscosity of Newtonian or near-Newtonian liquids. It is widely used in coatings, ink, gravure, letterpress, lithographic, flexographic, and screen printing industries for viscosity measurement before or during application. This helps maintain consistent viscosity within the desired range to ensure product performance and quality. The Zahn cup is a commonly used tool for liquid viscosity measurement. The dynamic viscosity is typically expressed in seconds and can be converted to centipoise using appropriate conversion methods. Standard Test Method: ASTM D4212 - Standard Test Method for Viscosity Measurement Using Dip Viscometers. Testing Procedure: - The test liquid should be at a temperature of 25°C, with temperature fluctuations kept within ±0.2°C. - Select the appropriate cup number based on the expected viscosity range of the liquid. - Fully immerse the cup into the test liquid. - Measure and record the liquid temperature inside the cup, then remove the thermometer. - Use the finger loop on the handle to lift the cup vertically in a quick and steady motion. - Start the stopwatch as the cup exits the liquid surface. - Maintain the cup no more than 15 cm above the liquid level during drainage. - Stop timing at the moment the first definite break in the liquid stream occurs. Maintenance: With proper care, the Zahn cup can last for many years. Clean the cup with a soft cloth after each use. Avoid using abrasive tools such as wire brushes, sandpaper, or harsh cleaning materials. Special attention should be given to cleaning the nozzle to remove residue without scratching the internal surfaces. Model and Technical Parameters: Features: Round-head stainless steel construction, precision-drilled nozzle, fine craftsmanship, accurate measurement, durable design. Models: Zahn No. 1, No. 2, No. 3, No. 4, No. 5 (No. 8 is for special liquids) Measuring range: 5–1840 mm²/s (centistokes) Conversion: Centistokes × specific gravity = centipoise Specifications: Model No. 1 - Measuring range (mm²/s): Approx. 5–56 - Nozzle diameter: 2.0 mm - Application: Very dilute liquids - Flow time (s): 35–80 Model No. 2 - Measuring range (mm²/s): Approx. 21–231 - Nozzle diameter: 2.74 mm - Application: Thinners, mixed paints, varnishes - Flow time (s): 20–80 Model No. 3 - Measuring range (mm²/s): Approx. 146–848 - Nozzle diameter: 3.76 mm - Application: Medium viscosity liquids, mixed coatings, varnishes - Flow time (s): 20–80 Model No. 4 - Measuring range (mm²/s): Approx. 222–1110 - Nozzle diameter: 4.26 mm - Application: Thicker liquids and mixtures - Flow time (s): 20–80 Model No. 5 - Measuring range (mm²/s): Approx. 460–1840 - Nozzle diameter: 5.28 mm - Application: Very thick liquids and mixtures - Flow time (s): 20–80 Note: - Due to manual measurement, a tolerance of 0.1–0.3mm may occur. - Color variations may appear due to differences in screen displays. Actual product color may slightly differ from images. Satisfaction Guarantee: Our goal is to provide a clear, honest, and complete description of our products. We are committed to ensuring a positive shopping experience. If you have any concerns, please before leaving negative feedback. We will make every effort to resolve any issues promptly.
  • Fruugo ID: 408913911-866227550
  • EAN: 1345150758913

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

安全上の警告: Please use according to the instructions or product details!

配送と返品

24時間以内に発送

  • STANDARD: ¥1,399 - 間の配達 火 04 11月 2025–火 11 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Jiang Yan
  • Guangzhou Ruicai E-commerce Co., Ltd.
  • Room D2709, 203, 2nd Floor, No. 4, Yuejia 2nd Street,Shimen Street, Baiyun District,Guangzhou City,Guangdong Province
  • Guangzhou
  • CN
  • 510420
  • lu61027yeyamei632@163.com
  • 13192975727

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149