About this itemYou will receive: 1 piece of black hand shower holder. Total length is 14cm, square bottom size is 7.5cm*6cm.Material: Made of outstanding ABS plastic, anti-rust, waterproof, durable, lightweight but with good bearing capacity.Features and function: designed to support the shower head no need to drill, just fix it by the back adhesive film to prevent the walls from being damaged.How to fix: Measure the installation height. Make sure the wall is dry and clean. Tear off the adhesive film. Squeeze the air out when you place it on the wall. Wait half a day or a day to let it dry.Suitable on: Non-porous, smooth and paperless surfaces. Better to be used on ceramic tile, mirror, marble and glass wall.Product information- Quantity: 1 pcs of hand shower holder- Color: Black- Material: ABS plastic- Size: 14cm(total length); 7.5cm*6cm (Base)- Loading range: about 20kgFunction is:- To support the shower head.Feature points:- No need to drill.- Easy to install with back adhesive film.- Spring tube 360 degree rotatable.- Can be a good decoration in your bathroom.Suitable on:-Non-porous, smooth and paperless surfaces. Better to be used on ceramic tile, mirror, marble and glass wall.- Cannot be used on the uneven wall, whitewashed wall, cement wall and wallpaper. Installation guide and cautions - Measure the installation height you need. - Make sure the wall is dry and not dirty before sticking the bracket. - Tear off the adhesive film. - Let the air out from the bottom of the bracket when you place it in the correct position you measured.- Wait 12 or 24 hours until the adhesive film is dry and secure before placing the shower head on the holder. Please know:- Please allow 1-2mm deviation due to manual measurement.- Please read the suitable wall type and installation precautions carefully.- If you are not satisfied with our product for any reason, please contact us at any time. We will help you solve the problem as best we can.Scope of delivery:1 x hand shower holder