Weight: 520g Color: white, pink, yellow Material: ABS/PC/PVC Quantity: Charged - 1pc Cute Cube Children's Foam Washing Phone Specifications: white-unicorn (foam) without hand sanitizer, pink-little dinosaur (foam) without hand sanitizer, yellow-lucky cat (foam) without hand sanitizer, pink-little dinosaur (gel) type) without hand sanitizer, white-little rabbit (gel type) without hand sanitizer Charging interface: Micro USB Battery capacity: 1200mAh Product use: Put your hand into the induction position about 5cm away from it for about 1S, and the foam will flow out; Stretch out your hands after the foam has flowed out; When the sensor is turned on, the warm light will stay on for 20 seconds and automatically turn off (reminder of the foaming time). Instructions: Short press the button once to turn on the power, and the warm light will stay on for about 3 seconds; .Short press the button once to turn off the power, and the warm light goes out for about 1 second; Press and hold the button for three seconds to enter the cleaning mode in the power-on state, single press to turn off/automatically turn off; The warm light keeps flashing to indicate that there is a foreign object blocking the sensor, and it will automatically shut down in about 5 minutes or remove the foreign object to return to normal; When reaching out to trigger the sensor, the warm light flashes quickly for 5 seconds and then goes out, indicating the low battery status. The indicator light flashes during charging and stays on when fully charged. Kind tips: 1. When used in a strong light environment or on a mirror surface, it is easy to interfere with the induction and cause insensitivity or failure to work. This is normal and not a product failure; 2. Please charge the product for about 4 hours before using it for the first time. Note 01: Do not wash with water; Use a rag to wipe lightly. Do not grasp the neck of the product to move; Should grasp the main body of the water tank to move. Do not fill up the foam liquid; Up to half the capacity of the water tank. Note 02: 1. Be sure to wipe clean the pasted wall area; 2. When pasting the bracket, please be sure to press the adhesive area firmly and keep pressing for more than 1 minute; 3. After pasting, you need to wait 24~48 hours before putting the product on the wall. Note: The sticking of the bracket is limited to smooth tiles and glass walls, and other materials may fall off.