Product Description: Cat with Belt Leakage Prevention - Now your cat can bravely explore the external world and enjoy maximum comfort and safety. Putting a seat belt on your cat is not only an ideal choice for walking, exercising, or traveling, but also a good idea when taking sensitive children to a unfamiliar place, such as a veterinarian or beautician. The seat belt is made of high-quality pet material, so your cat will wear it like a champion. All features have been carefully designed to provide a safe and comfortable wearing experience. Friendly reminder: Before purchasing, please carefully measure your cat and refer to the size chart. There are two sizes to choose from: XS size is suitable for medium-sized adult cats (neck size: 21.6-27.9 cm, chest size: 34.2-40.6 cm). S size is suitable for large cats (neck size: 27.9-34.8 cm, chest size: 45.7-50.8 cm). If your cat is between the two sizes, please choose the smaller size. This seat belt is not suitable for newborns or kittens. The quick release buckle is easy to place and remove, with 2 side buckles. It can effectively secure the wiring harness. The sturdy metal belt ring matches the 150cm belt with the metal belt fixing ring on the back. The sturdy nylon webbing is made of sturdy material, with good adjustment ability and safety. How to install and adjust a seat belt: Slide the collar onto the pet's head. The "RabbitGoo" logo should be placed on the pet's front chest, and the D-ring should be placed on the pet's back. Place the lower strap between the pet's two front legs, below the abdomen. After correctly positioning the seat belt on the pet's body, fasten the two side buckles upwards Use 4 adjustment straps (2 on the neck and 2 on the chest) to adjust the seat belt. Slide the adjustment device and pull or push the belt through the adjustment device to form a good fit. How to install and adjust the seat belt: When the seat belt is installed correctly, you should be able to place a finger between the seat belt and any part of the pet's body, so that the seat belt can be installed correctly without restricting the pet's movement. If multiple fingers can be inserted, the wiring harness may be too large After checking the joint, connect the belt to the rear fixing ring. How to set and adjust seat belts: The figure above refers to the minimum position of the neck. To tighten the neck strap: - Thread the strap through the slider, keeping it away from the front logo and close to the rear D-ring. The following figure refers to the maximum position of the neck. Lengthen the shoulder strap: - Pull the neck slider away from the rear D-ring to bring it closer to the front logo. How to wear and adjust seat belts: The figure above refers to the minimum position of the chest. To tighten the chest strap: - Thread the strap through the slider and bring the slider to the side ring until they are connected together. The following figure refers to the maximum position of the chest. To lengthen the chest belt: - Pull the chest slider away from the side buckle and bring it closer to the pet's clock. How to show the safety belt to the cat: 1. To familiarize your cat with the seat belt, please keep it near the cat's food box or sleeping area for a few days. When you wear a seat belt, treat your cat with food or toys so that it can form a positive connection with the seat belt. You can also register for these rewards and only provide them when you tow the cat. Don't forget to rent your cat throughout the entire process. If your cat exhibits a behavior that indicates an uncomfortable wearing experience, please reassure it and try to distract it with food or toys. If your cat still feels uncomfortable, please remove the seat belt - you can try again later. Never force your cat to wear a seat belt, as your cat may have very poor contact with the seat belt and even get injured.