Product name: Wagging tail cat wall clockProduct material: acrylicColors: White, BlackProduct process: laser cutting glass-free bell jarMovement: Scan silentSize: 42*18cm/ 16.54 * 7.09 inchList: 1pcs*cat wall clockinstallation method:1. Take out the received product accessories (hands, movement, acrylic clock face, traceless nails)2. Take out the nut and metal gasket installed on the movement shaft3. Keep the black rubber gasket on the movement shaft (pay attention to the direction)4. Insert the cat clock face into the movement shaft5. Put the metal spacer on the front of the wall clock6. Tighten with metal nut7. Take out the hour hand, align it with the 12 o'clock direction, and press it firmly with your thumbs at the same time.8. Take out the minute hand and fix it in the same way as above9. Finally insert the second hand to ensure that the three needles are parallel10. Rotate the circle behind the movement to adjust the time11.Insert the battery and fasten the tail12. Hang it on the wall with the pre-prepared traceless nails, and youre done.Notice:Please understand that color deviation may vary due to different monitor settings.Due to manual measurement, there will be some errors, which is a normal phenomenon.If you encounter problems, please inform us at the first time, we will give you the best service and solve the problem at the first time. Thanks.