20W Mini Dehumidifier For Home Bathroom Air Dryer Moisture Absorber 1. Recyclable: Recyclable silica particles are used to absorb moisture without consumables. After the moisture absorption reaches a saturated state, the moisture absorption capacity can be restored by simply heating and drying the dehumidification particles. 2. When the humidity in the air environment is too heavy, the micropores on the surface of the silica crystal will capture the excess moisture in the air, preventing reverse infiltration and water accumulation. 3. The power is as low as 20W, and the moisture absorption reaches the saturation level before drying. Drying only requires 1 kilowatt hour of electricity per month (please open the support frame when drying) 4. Tight dehumidification holes cover both sides of the fuselage to increase the moisture absorption area and improve dehumidification efficiency. 5. Designed for dehumidification in small spaces, can be hung or laid flat 6. The orange silica crystals gradually turn into dark green as the absorbed water increases, visually displaying the saturation of water absorption, allowing you to start the drying mode in time. 7. 300 grams of large-capacity dehumidification particles only need to be heated and dried for 15-25 hours, and the moisture absorption can last for 7-15 days, quickly solving the problem of moisture and mold in micro spaces, and keeping you comfortable and dry for a long time. 8. Built-in two PTC ceramic heating elements, combined with thermally conductive aluminum plates, it has good thermal conductivity, a larger heating area, and can be quickly heated back to a dry state. There is no open flame, no odor, non-conductivity, safety and reliability during operation. 9. High temperature resistant and flame retardant ABS material, making drying more reliable 10. Rated power: 20W 11. Rated frequency: 50hz 12. Dimensions: 17.5 x 11.5cm ?